UPS Systems

It’s absolutely vital in the digital age that you can have peace of mind regarding the continuity of your business. A key component of this the installation of an uninterruptible power supply (UPS). In the event of power failure, a UPS can provide vital minutes of power. Extra time can be added with the addition of extra batteries, for minutes, or a generator, for hours or days.

When it comes to choosing the right UPS for your business, the exceptional selection we have on offer provides a comprehensive and robust series of options. Whether you need a plug-and-play UPS for home use or an industrial UPS for largescale commercial power, our wide selection of units and brands ensures we can find the optimal choice of device from our portfolio to suit your needs.

When choosing a UPS, be aware that there are several varieties, each functioning best within a certain power range.

  • Standby/Off-line UPS operate as standalone units that activate in the event of power failure from the primary source. Practical power range of 0-0.5 kVA. 
  • Line Interactive/On-line UPS operates with the primary source flowing through and charging the battery, which enables smoother transitions in the event of power failure. Practical power range of 0.5-5 kVA. 
  • Double Conversion On-Line UPS is similar to standby UPS except that rather than AC mains being the primary source of power, it’s the inverter. Practical power range of 5-5000 kVA.

Working with dominant brands like APC, Eaton, Riello and BPC, UPS Systems has the uninterruptible power supply that your business needs.

Showing 49-60 of 227 results

per page
View as
  1. Riello MultiCOM 384 Contacts / EPO board
    MultiCOM 384 provides a set of relay contacts to provide UPS alarm and status indication. The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Low battery. The contacts are change over or normally open. This model has replaced the MultiCOM 382
  2. Riello MultiCOM 392 Contacts Board
    MultiCOM 392 provides a set of relay contacts to provide UPS alarm and status indication. The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Low battery. The contacts are change over or normally open.
  3. Riello Net Power 1.5KVA (NPW 1500)

    The Net Power 1.5KVA is powered through the mains an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress voltage spikes. If the mains fails the load is powered by an inverter. Using PowerShield the Net Power 1.5KVA uses a pseudo sinewave to supply plentey of time for the computer system to shutdown.

  4. Riello Net Power 1KVA (NPW 1000)

    The Net Power 1KVA is powered through the mains an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress voltage spikes. If the mains fails the load is powered by an inverter. Using PowerShield the Net Power 1KVA uses a pseudo sinewave to supply plentey of time for the computer system to shutdown.

  5. Riello Net Power 2KVA (NPW 2000)

    The Net Power 2KVA is powered through the mains an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress voltage spikes. If the mains fails the load is powered by an inverter. Using PowerShield the Net Power 2KVA uses a pseudo sinewave to supply plentey of time for the computer system to shutdown.

  6. Riello Net Power 600VA (NPW 600)

    The Net Power 600VA is powered through the mains an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress voltage spikes. If the mains fails the load is powered by an inverter. Using PowerShield the Net Power 600VA uses a pseudo sinewave to supply plentey of time for the computer system to shutdown.

  7. Riello Net Power 800VA (NPW 800)

    The Net Power 800VA is powered through the mains an AVR to stabilise brownout, sag and surge voltages, and EMI filters to suppress voltage spikes. If the mains fails the load is powered by an inverter. Using PowerShield the Net Power 800VA uses a pseudo sinewave to supply plentey of time for the computer system to shutdown.

  8. Riello Sentinel Dual 1.5KVA SDH (SDH 1500)

    The Riello Sentinel Dual 1.5KVA SDH single-phase models have on-line double conversion (VFI) technology. The DIALOG DUAL range may be placed directly on the floor or mounted in 19

  9. Riello Sentinel Dual 10KVA SDU (SDU 10000)
    This product replaced the Riello Sentinel Dual 10KVA SDL. HIGHLIGHTS
  10. Riello Sentinel Dual 1KVA SDH (SDH 1000)

    The Riello Sentinel Dual 1KVA SDH 1kVA single-phase models have on-line double conversion (VFI) technology. The Riello Sentinel Dual 1KVA SDH 1kVA may be placed directly on the floor or mounted in 19

  11. Riello Sentinel Dual 2.2KVA SDH (SDH 2200)

    The Riello Sentinel Dual 2.2KVA SDH single-phase models have on-line double conversion (VFI) technology. The DIALOG DUAL range may be placed directly on the floor or mounted in 19

Showing 49-60 of 227 results

per page
View as