AKSA 10kVA Generator

AKSA APD10PE

10kVA Generator

Standby: 8kW/10kVA

Prime: 7.2kW/9kVA

Engine: Perkins 403D-11G

Controller: DSE6120

 

Full Specification

Pramac 10kva Generator

Pramac GSW10P

10kVA Generator

Standby: 7.15kW/7.15kVA

Prime: 6.5kW/6.5kVA

Engine: Perkins 403D-15G

Controller: COMAP AC03

 

Full Specification

10kVA Generator FAQ

1. What is the typical size of a 10kVA Generator?

1,500mm long x 750mm wide x 950mm high

2. What is the typical mass of a 10kVA Generator?

400kg without fuel

3. What is the typical fuel tank capacity of a 10kVA Generator?

32 litres

4. What is the typical run time of a 10kVA Generator?

12 hours full load

5 . What is the typical fuel consumption of a 10kVA Generator?

2.5 litres of fuel per hour

6. What is the typical sound attenuation of a 10kVA Generator?

80 dBA at 1 meter and 67 dBA at 7 meters (dBA (A-weighted decibels) is an expression of the relative loudness of sounds as perceived by the ear)

If you have any other questions about 10kVA generators or what to would like to purchase one please fill in the form to the right or contact us.

Alternatively, you can find more information on 10kVA generators below.

Contact us about your 10kVA Generator requirements

10kVA generators are one of the most popular standby generators. These diesel generators are rated over the 10kVA for prime use (normally 8-9kVA), however, standby by generators are rated slightly under their prime value for standby power. This is to account for an extra power requirments of equipment loading up, after a power cut.

You can find our 10kva Generators here:

AKSA 10kVA Generator

Pramac 10kVA Generator

A standby 10kva generator is a backup electrical system that operates automatically, within seconds of an outage an automatic transfer switch (ATS) senses the power loss and starts the generator. This can be paired with a UPS system to ensure the load isn't dropped at all, not even for a second. The standby generator then begins supplying power to the connected equipment. After the mains power returns, the automatic transfer switch transfers the load back to the mains and the standby 10kVA generator is shut off.

We offer generators from a range of manufacturers including AKSA Generators and Pramac Generators. If you are looking for an Uninterruptible Power Supply (UPS) system to work with you standby generator for an instant switch over, we supply UPS from Riello UPS, APC UPS and more.

Our Clients

To Top