AKSA 20kVA Generator

AKSA APD22PE

20kVA Generator

Standby: 17.6kW/22kVA

Prime: 16kW/20kVA

Engine: Perkins 404A-22G

Controller: DSE6020

Price: £6,110 + VAT

 

Full Specification

Pramac 20kva Generator

Pramac GBW30P

20kVA Generator

Standby: 18kW/19kVA

Prime: 16kW/18kVA

Engine: Perkins 1103D-30G

Controller: COMAP AC03

Price: £7730 + VAT

 

Full Specification

20kVA Generator FAQ

1. What is the typical size of a 20kVA Generator?

1,500mm long x 900mm wide x 1100mm high

2. What is the typical mass of a 20kVA Generator?

850kg without fuel

3. What is the typical fuel tank capacity of a 20kVA Generator?

95 litres

4. What is the typical run time of a 20kVA Generator?

17 hours full load

5 . What is the typical fuel consumption of a 20kVA Generator?

5.3 litres of fuel per hour

6 . What is the typical sound attenuation of a 20kVA Generator?

80 dBA at 1 meter and 67 dBA at 7 meters (dBA (A-weighted decibels) is an expression of the relative loudness of sounds as perceived by the ear)

If you have any other questions about 20kVA generators or what to would like to purchase one please fill in the form to the right or contact us.

Alternatively, you can find more information on 20kVA generators below.

Contact us about your 20kVA Generator requirements

20kVA generators are one of the most popular standby generators. These diesel generators are rated over the 20kVA for prime use (normally 18-19kVA), however, standby by generators are rated slightly under their prime value for standby power. This is to account for an extra power requirments of equipment loading up, after a power cut.

You can find our 20kva Generators here:

AKSA 20kVA Generator

Pramac 20kVA Generator

A standby 20kva generator is a backup electrical system that operates automatically, within seconds of an outage an automatic transfer switch (ATS) senses the power loss and starts the generator. This can be paired with a UPS system to ensure the load isn't dropped at all, not even for a second. The standby generator then begins supplying power to the connected equipment. After the mains power returns, the automatic transfer switch transfers the load back to the mains and the standby 20kVA generator is shut off.

We offer generators from a range of manufacturers including AKSA Generators and Pramac Generators. If you are looking for an Uninterruptible Power Supply (UPS) system to work with you standby generator for an instant switch over, we supply UPS from Riello UPS, APC UPS and more.

Our Clients