In stock
SKU
SMT3000RMI2U
APC UPS Smart UPS 3KVA SMT3000RMI2U
APC UPS Smart UPS (Uninterruptible Power Supply) 3KVA SMT3000RMI2U is a 2U rackmount 2700W 3000VA UPS that is trusted to protect critical data and equipment from power problems.
-
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
-
Adjustable voltage-transfer pointsMaximizes useful UPS Battery life by widening the input voltage window or tightening the output voltage regulation.
-
Audible alarmsProvides notification of changing utility power and UPS power conditions
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Automatic self-testPeriodic UPS Battery self-test ensures early detection of a UPS Battery that needs to be replaced.
-
UPS Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Boost and Trim Automatic Voltage Regulation (AVR)Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
-
Cold-start capableProvides temporary UPS Battery power when the utility power is out.
-
Disconnected UPS Battery notificationWarns when a UPS Battery is not available to provide backup power.
-
Energy meterProvides actual kilowatt hours of usage for energy conscious users.
-
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the UPS Battery.
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
High online efficiencyReduces utlility costs, generates less heat.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Intelligent UPS Battery managementMaximizes UPS Battery performance, life, and reliability through intelligent, precision charging.
-
Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
-
LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.
-
Network manageableProvides proactive notifications of changing power or unit conditions and provides the user the ability to remotely control PMU functions.
-
Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
-
Predictive replace UPS Battery dateDynamically provides the month and year when UPS Battery replacement is recommended to aide in long term maintenance planning.
-
Preinstalled network management cardProvides for remote management and control of the UPS over a network out of the box.
-
Pure sine wave output on UPS BatterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
-
Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.
-
Serial connectivityUse any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC UPS's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
-
Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
-
SmartSlotCustomize UPS capabilities with management cards.
-
StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.
-
Temperature-compensated UPS Battery chargingProlongs UPS Battery life by regulating the charge voltage according to UPS Battery temperature.
-
USB connectivityProvides management of the UPS via a USB port (not available on all models).
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Wide input voltage rangeDesigned for harsh electrical environments to save UPS Battery life.
Weight | 44.000000 |
---|---|
Application | Servers and Networking |
Barcode | 731304284642 |
Standalone / Modular | Modular |
Design Life | 5 year |
System Brand | APC UPS |
kVA | 0-10 KVA |
Product Type | Single In - Single Out |
Form Factor | Modular |
Write Your Own Review
We found other products you might like!